The RGB3C is a basic 3-channel RGB LED controller. It was designed to control any standard 3 channel RGB fixture where channel 1 is red, channel 2 is green and channel 3 is blue. All LED fixtures must be set to run in DMX mode and be addressed to DMX channel 1.
Features:
- 9 direct access “Static Color” buttons that contain pre-programmed color presets
- 3 manual RGB faders, to set a desired color on the fly
- Program select button that allows for 7 static colors
- 10 chase programs that can be accessed via the program select fader
- Sound Active button that activates the 10 chase programs to randomly sequence via an internal microphone
- Auto run button that also activates the 10 chase programs to randomly sequence
- Speed fader that controls the speed of the chases
- Hold button that pauses the current scene and remains locked in even when power to the controller is switched off and on
- Blackout button to bring all values to zero so there is no output going to your fixtures
Specifications:
- DMX output connector: 3-pin XLR
- Power In: 9-12V 300mA (Included)
- Power consumption: 3.6 Watts
- Size: 8.7” x 5.5” x 2.5”
- Weight: 1.8lbs