Rosco 10 rpm Single Gobo Rotator

The Rosco Gobo Rotator is designed to fit most ellipsoidal fixtures with a drop in iris slot, and allows a gobo to be rotated in the center axis of the beam.

The Gobo Rotator accepts a stainless steel B size gobo. It is secured in the optical path with a high temperature spring clip and an aluminum retaining ring. The unit will also accept any of the full range of Rosco Glass Gobos. (Effects Adaptors will be necessary to adapt a 76mm glass gobo to the 79mm rotator opening.)

Speed and Direction
The Gobo Rotator has one variable speed 12V DC motor that controls the speed and direction of the gobo. The motor requires 2 channels of drive for operation, one for forward and one for reverse. The DC/DMX controller will operate 2 Double Gobo Rotators or 4 Single Gobo Rotators.

Motor Options
This configuration can plug into standard 100, 120 and 240 volt outlets (motor voltage must be specified when ordering) and will operate at it's fixed speed in opposing directions.